Information
Contact
C&G Consulting (Beijing) Co., Ltd.

RM.921 Great Wall Plaza,
No.22 Shijingshan Road,
Beijing, 100043, P. R. China
Tel: +86-10-8869-2232/-2242
Fax: +86-10-8869-2009
E-mail: info@cg-china.com


Current Location:Home > Information > Information Center
SCHAKE AUTOPOSI-Plus System

The AUTOPOSI-plus system is used for positioning coke oven machines and other rail-bound vehicles.
The robust construction of the positioning device and the special fibre optic technology allow a nearly maintenance application on coke oven machines.

The most essential features of the AUTOPOSI-plus system are:

- Applicable with travel speeds up to 400m/min
- Automatic identification of the machine's travel direction
- Automatic detection of contamination
- Continuous absolute position detection along the oven battery respectively along the track
- Reading of oven numbers during travelling
- Easy integration into existing control systems
- Heat-resistant with temperatures of up to 300 ℃
- Positioning accuracy of up to ±2 mm


Software

The software monitors all safety-relevant components of the system such as rotary pulse encoder and light barriers of the reading head, as well as the travel speed of the machine.
The system detects wrong or illogic inputs made by the operator.
The system also detects contamination of the reading device (light barrier), as well as destroyed, missing or illogic target plates and - via an integrated operation and fault reporting system - reports them in time to the operator or to the control room respectively.
An integrated fault and diagnostic system supports the commissioning and maintenance of the system.


Operation and Display

Operating the Autoposi-plus system as well as its visualisation is carried out via the HMI operator panel.
Depending on the customer's requirements touch screen or soft key switch panel are used. The application of different visualisation systems such as WinCC
®, WiCC flexible®, InTouch® etc. is possible.

Customer preferences with regard to the visualisation are considered during projection phase. An integration of the Autoposi operation menu into the existing visualisation is possible.

Copyright © 2013 C&G Consulting (Beijing) Co., Ltd. , All Rights Reserved 
Addr: RM921 Great Wall Plaza, No.22 Shijingshan Road, Beijing, 100043, China  
Website Design:SP